- Catalog Home
- Exterior Accessories
- Bumper
- Bumper- Front
Bumper- Front
- Heavy Duty 3/16 Steel Construction Protects The Vehicles Vital Components And Add Strength
- Fully Compatible With OE Sensor Package Radius To Match OE Styling
- Winch Mount Compatible
- Light Mounts Included
- Provision For One 30 in. Light Bar-Single Or Double Row And Up To Four 2x2 Pod Lights
- D-Ring Mount Included
- Smitty Bilt Apollo JL/JT Front Bumper
- Bold Stubby Bumper Profile Perfect For Off-Road
- Patented-Design Made From Stamped 11-Gauge Steel
- Bold Stubby Bumper Profile Perfect For Off-Road
- Patented-Design Made From Stamped 11-Gauge Steel
- Massive 1 In. Thick Recovery Hooks w/Dual-Drilled Shackle Mounts
- Built-In Off-Road Jack Lifting Points
- Simple Bolt-On Installation
- Classic Rock Crawling Front Bumper
- Gloss Black
- Without Raiser
- Welded End Caps
- Limited 5 Year Warranty
- Direct Fit
- Two-stage textured matte black finish
- Manufactured from 3/16-inch cold rolled steel
- Innovative 4-piece design
- Lower design winch plate allows greater air flow
- Protects your off-road beast from rocks; dirt and debris
- Adds rugged elegance and style to your vehicle
- Premium quality construction for impeccable strength and superior reliability
- Tough as nails to stand up to just about anything you may encounter off road
- Marine grade stainless steel hardware
- 5 Year Limited Warranty
- Gloss Black
- With Raiser
- Welded End Caps
- Limited 5 Year Warranty
- Protects Vehicle From Damage Against Wildlife And Road Debris
- Provides Added Safety To Driver And Vehicle
- Heavy Duty Diamond Plate Steel
- Honeycomb Mesh Protects Grille/Gives Maximum Airflow
- 1.5 in. Headlight Protection Tubes
- 2 in. Full Wraparound Wings Ties Into Bumper
- Provisions For Factory Parking Sensors
- 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
- Compatible For Factory Fog Lamps Or LED Post Mount Lights
- Custom Die Cast Riveted Logo Badge
- Mounting Provisions For License Plate
- Hardware Mounting Brackets Included
- High-Strength Steel Construction
- Built-In Recessed Winch Plate Improves Airflow To Radiator
- Direct Fit
- Black Powder Coat
- M1 Truck Front Bumper
- Manufactured From 3/16 and 1/4 Cold Roll Steel
- Ultra Bright Driving And Fog Lights
- Solid Mount D-Rings - Welds On The Inside And Out
- Solid Plate Center Section That Wraps The Frame Horns And Lower Crossmember
- Mount Kit Included
- 2 In. Diameter Tube Frame With 1.5 In. Diameter Center Tubes
- Integrated Mount For Two Single Or One Double Row 30 In. LED Bar
- Equipped With Mount Points For Optional Auxiliary Lighting
- Optional Outlaw Skid Plate Available. Sold Separately
- Optional Outlaw Led Light Kits Available. Sold Separately
- Round Led Light Kit w/Westin Auxiliary Lights Sold Separately
- Square Led Light Kit w/Hyper Auxiliary Lights Sold Separately
- Lightweight Design Reduce Shipping Cost w/o Sacrificing Strength
- Increases Ground Clearance And Angle Of Approach
- Constructed Of 10 Gauge Steel For Strength And Style
- Mesh Screen Allows Maximum Air Flow To Intercooler/Radiator Area
- Has Provisions For Factory Sensors - On Some Applications
- 10 Gauge Steel Valance Included - On Some Applications
- Valance Features Laser-Cut Westin Logo
- Bolt On Skid Plate Available - Sold Separately
- Compatible For Factory Tow Hooks - On Some Applications
- Outrigger Brackets Support Wings Of Bumper For Maximum Strength
- Hardware And Mounting Brackets Included
- E-Coated Base Coat Provides Long Lasting Corrosion Protection
- Low Profile Design
- The OEM Bumper That Fits Most 8000-12000 Lbs Winch Models
- Accommodates Recessed Hawse Fairlead For Maximize Approach Angle
- Constructed Of 10 Gauge Steel For Strength And Style
- Heavy-Duty 4 Gauge Winch Mount Center Section
- Features Large Winch Access Holes For Easier Operation
- Provides Two Recovery Points For Shackles
- Configured To Accept Most Single Row 20 in. Led Light Bars
- Available In Two Bull Bar Styles/Round And Angular
- Hardware And Mounting Brackets Included
- E-Coated Base Coat Provides Long Lasting Corrosion Protection
- Available In Textured Black Finish
- Low Profile Design
- The OEM Bumper That Fits Most 8000-12000 Lbs Winch Models
- Accommodates Recessed Hawse Fairlead For Maximize Approach Angle
- Constructed Of 10 Gauge Steel For Strength And Style
- Heavy-Duty 4 Gauge Winch Mount Center Section
- Features Large Winch Access Holes For Easier Operation
- Provides Two Recovery Points For Shackles
- Configured To Accept Most Single Row 20 in. Led Light Bars
- Available In Two Bull Bar Styles/Round And Angular
- Hardware And Mounting Brackets Included
- E-Coated Base Coat Provides Long Lasting Corrosion Protection
- Available In Textured Black Finish
- Black
- Bumper only
- Stamped Steel
- Efficient Stamping Process Used
- Creates A Product Lighter Than Most Aftermarket Steel Bumpers
- Sturdy 11 Gauge Powder Coated Steel Construction
- Full Width Standard Ends Add An Aggressive Off-Road Look
- Black Textured Powder Coat Finish Resists Rust And Corrosion
- Incl. HD Winch Plate/D-Shackle Mounts/Stylized Overrider
- Direct Bolt-On Replacement/Maintains Factory Fog Lights
- Limited 5 Year Warranty
- Direct Fit
- Two Stage Matte Black Powder Coat Finish
- Bumpers Bolt Directly To Your Vehicle
- Requires No Drilling Or Modifications
- 5-Year Limited Warranty
- Direct Fit
- Textured Black Powder Coat
- Four Taps To Mount Lights
- Wide Opening Allows For Winch Installation
- 1/4 in. Thick Custom Mounting Brackets
- Welded D-Ring Tabs
- Durable 2 in.X.120 in. Wall Over Built
- Bumpers Bolt Directly To Your Vehicle
- Requires No Drilling Or Modifications
- 5-Year Limited Warranty
- 2 And 4-Door Models
- Factory 10th Anniversary Rubicon lights will not fit
- New max solid D-ring and jack point mount - welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Fender To Fender Protection
- Not Vehicle Specific
- Aggressive; stubby bumper design can convert to full-protection bumper
- Deep draw press-formed 3mm cold rolled steel for strength and weight savings
- Bolt-on internal winch plate ;accommodates up to 12k with Integrated lift points and 7/8 in. D-rings mounts
- Removeable overrider can fit single row LED light bar
- heavy duty reinforced skid plate with added lower mounting support
- Provision for OE style fog lights *Excluding lights supplied tih metal Rubicon front bumpers
- Optional side wings ;76731; sold separately with mounts for 3x3 cube lights
- Muscular Stamped Steel Construction
- Patented Design Features Sculpted Contours And Sweeping Arches
- Features Built-In Winch Plate/Massive 1-Inch Thick Recovery Hooks
- Octagonal Pockets Accept factory JL / JT Fog Lights
- Easy Bolt-on Installation
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
- Innovative 3 piece design
- Lower design winch plate allowing greater air flow
- Bolt on skid plate
- Re-uses OE fog light
- Manufactured from 3/16 cold rolled steel
- Solid D-Ring mounts
- Tow-able D-ring mounts
- Two-stage textured matte black finish
- Marine grade stainless steel hardware
- Powder coat finish with 5 year warranty
- Smittybilt Advantage Warranty - Limited Lifetime Warranty
- Direct Fit
- 2-Stage Textured Black Powder Coat
- Degree Approach Angles And Raised Corners
- 3/16 in. Cold Rolled Steel
- Stinger Is 1.75 in. Tubing
- Accepts Up To Two 9 in. Lights
- Bumpers Bolt Directly To Your Vehicle
- 5-Year Limited Warranty
- Manufactured From 3/16 Cold Roll Steel
- 1.75 in. 120 Wall Over Rider And Kickers
- Raised corners for better entry and exit under the most extreme conditions
- Solid Mount D-Rings - Welds On The Inside And Out
- Solid Plate Center Section That Wraps The Frame Horns And Lower Cross Member
- Built In Winch Plate To Accommodate Up To 10K Winch
- One-Piece Welded Design
- Two Stage Matte Black Finish Powder Coat Finish
- 5 Year Limited Warranty
- Direct Fit
- 3/16-inch cold rolled steel
- Two-stage textured matte black finish
- 1.75 in. .120 wall kickers offers fender-to-fender coverage
- PP TPO slip strips / the ultimate for rock crawling; provides 5/16 in. additional damage protection
- Max solid D-ring and jack point mount welded on the inside and out
- OE fog light ports ;Lights not included
- Compatible With the Alpine Front Facing Camera; HCE-C2600FD4;Sold Separately
- Smittybilt Advantage Lifetime Warranty
- Textured Black
- Steel
- No Winch Mount or D-Rings
- Limited 5 Year Warranty
- Textured Black
- Incl. XHD Frond Winch Bumper And D-Rings
- Incl. Over Rider Hoop And Standard Bumper Ends
- Modular Design
- Steel
- Textured Black
- 2.5 in. Tubing
- Modular Design
- Bolt-on
- Limited 5 Year Warranty
- High Strength And Lightweight Design
- Low Profile Winch Mount Improves Air Flow
- Integrated Lightweight 10-Gauge Steel Shell And 4-Gauge Steel Winch Tray Provides Superior Strength
- Features 4.5 in. X 10 in. Winch Mount Pattern
- Accommodates Most Winches Up To 12000 lbs Capacity
- Provides Two Recovery Points For Shackles
- Compatible With All Factory Sensors
- Hardware And Mounting Brackets Included
- E-Coated Base Coat Provides Long Lasting Corrosion Protection
- Available In Textured Black Finish